Power Config
See Power Config for additional power config details.

Generated

from protobuf message Config.PowerConfig

Hierarchy

  • Config_PowerConfig

Properties

adcMultiplierOverride: number

Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k) Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation. Should be set to floating point value between 2 and 4 Fixes issues on Heltec v2

Generated

from protobuf field: float adc_multiplier_override = 6;

Sets the current of the battery charger TBEAM 1.1 Only

Generated

from protobuf field: Config.PowerConfig.ChargeCurrent charge_current = 1;

isPowerSaving: boolean

If set, we are powered from a low-current source (i.e. solar), so even if it looks like we have power flowing in we should try to minimize power consumption as much as possible. YOU DO NOT NEED TO SET THIS IF YOU'VE set is_router (it is implied in that case). Advanced Option

Generated

from protobuf field: bool is_power_saving = 2;

lsSecs: number

Light Sleep Seconds In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on ESP32 Only 0 for default of 300

Generated

from protobuf field: uint32 ls_secs = 11;

meshSdsTimeoutSecs: number

Mesh Super Deep Sleep Timeout Seconds While in Light Sleep if this value is exceeded we will lower into super deep sleep for sds_secs (default 1 year) or a button press 0 for default of two hours, MAXUINT for disabled

Generated

from protobuf field: uint32 mesh_sds_timeout_secs = 9;

minWakeSecs: number

Minimum Wake Seconds While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value 0 for default of 10 seconds

Generated

from protobuf field: uint32 min_wake_secs = 12;

onBatteryShutdownAfterSecs: number

If non-zero, the device will fully power off this many seconds after external power is removed.

Generated

from protobuf field: uint32 on_battery_shutdown_after_secs = 4;

sdsSecs: number

Super Deep Sleep Seconds While in Light Sleep if mesh_sds_timeout_secs is exceeded we will lower into super deep sleep for this value (default 1 year) or a button press 0 for default of one year

Generated

from protobuf field: uint32 sds_secs = 10;

waitBluetoothSecs: number

Wait Bluetooth Seconds The number of seconds for to wait before turning off BLE in No Bluetooth states 0 for default of 1 minute

Generated

from protobuf field: uint32 wait_bluetooth_secs = 7;

Generated using TypeDoc