Type Alias Config_PowerConfig

Type declaration

• adcMultiplierOverride: number

  Ratio of voltage divider for battery pin eg. 3.20 (R1=100k, R2=220k) Overrides the ADC_MULTIPLIER defined in variant for battery voltage calculation. https://meshtastic.org/docs/configuration/radio/power/#adc-multiplier-override Should be set to floating point value between 2 and 6

  Generated

  from field: float adc_multiplier_override = 3;

• deviceBatteryInaAddress: number

  I2C address of INA_2XX to use for reading device battery voltage

  Generated

  from field: uint32 device_battery_ina_address = 9;

• isPowerSaving: boolean

  Description: Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don't use this setting if you want to use your device with the phone apps or are using a device without a user button. Technical Details: Works for ESP32 devices and NRF52 devices in the Sensor or Tracker roles

  Generated

  from field: bool is_power_saving = 1;

• lsSecs: number

  Description: In light sleep the CPU is suspended, LoRa radio is on, BLE is off an GPS is on Technical Details: ESP32 Only 0 for default of 300

  Generated

  from field: uint32 ls_secs = 7;

• minWakeSecs: number

  Description: While in light sleep when we receive packets on the LoRa radio we will wake and handle them and stay awake in no BLE mode for this value Technical Details: ESP32 Only 0 for default of 10 seconds

  Generated

  from field: uint32 min_wake_secs = 8;

• onBatteryShutdownAfterSecs: number

  Description: If non-zero, the device will fully power off this many seconds after external power is removed.

  Generated

  from field: uint32 on_battery_shutdown_after_secs = 2;

• powermonEnables: bigint

  If non-zero, we want powermon log outputs. With the particular (bitfield) sources enabled. Note: we picked an ID of 32 so that lower more efficient IDs can be used for more frequently used options.

  Generated

  from field: uint64 powermon_enables = 32;

• sdsSecs: number

  Super Deep Sleep Seconds While in Light Sleep if mesh_sds_timeout_secs is exceeded we will lower into super deep sleep for this value (default 1 year) or a button press 0 for default of one year

  Generated

  from field: uint32 sds_secs = 6;

• waitBluetoothSecs: number

  Description: The number of seconds for to wait before turning off BLE in No Bluetooth states Technical Details: ESP32 Only 0 for default of 1 minute

  Generated

  from field: uint32 wait_bluetooth_secs = 4;